星期六, 6月 12, 2021
Home PV Technology Role of distributed solar at issue in California’s net metering update

Role of distributed solar at issue in California’s net metering update

Industry groups focus on solar-plus-storage, or preserving the distributed solar industry, while a state agency aims to compensate rooftop solar at avoided costs and add a grid service charge.

Source:pv magazine

Now that California gets over 22% of its electricity from solar, the state is again revising its compensation scheme for newly installed distributed solar.

Key parties in an ongoing rate proceeding, widely known as NEM 3.0, agree that new distributed solar should be compensated at lower rates than in the past. They disagree about what the new rates should be, with each party anchoring its proposal in a distinct philosophy.

Solar plus storage “will be the future of renewable distributed generation in California,” says a joint proposal from the national solar trade association Solar Energy Industries Association (SEIA) and the nonprofit Vote Solar.

(Read “Clean energy advocates are ready to do battle over California’s net energy metering program.”)

Distributed storage is “necessary” for California’s wildfire-prone grid, and will also help manage distribution circuits as loads increase due to electrification, said the California Solar & Storage Association (CALSSA). Because existing solar providers are best able to install distributed storage at scale, the group said, the state’s distributed solar industry must be preserved by compensating self-generators at attractive levels.

Meeting California’s greenhouse gas reduction goals through utility-scale renewables alone “is not a realistic scenario,” said CALSSA, saying that transmission siting will be “extremely difficult,” and that based on recent experience, new transmission will be “enormously expensive.”

The Public Advocates Office of the California Public Utilities Commission (CPUC) aims to benefit and “fairly compensate” homeowners who add solar based on the “actual value” of the energy, in a way that “supports electric service affordability for all customers.”

California’s dual mandate

California has a dual mandate for setting electricity rates for self-generators. State law AB 327 calls for these rates to balance the costs and benefits of self-generation, while ensuring that customer-sited renewable generation can grow sustainably.

To balance costs and benefits, SEIA and Vote Solar proposed reducing compensation for self-generation below current “NEM 2.0” rates. New residential self-generators who are served by two of the state’s three major utilities would be required to use existing untiered time-of-use rates designed to promote electrification. Because those rates are lowest during sunny hours, they would provide a “strong incentive” for new distributed generation customers to include storage, the groups say.

he export rates for these customers would then step down over five years, which the groups said would meet California’s sustainable growth goal. They added that customers should be allowed to oversize their systems by up to 50%, to provide for load growth due to additional electric vehicles and heat pumps.

CALSSA proposed a step-down of export credits below current retail rates for new residential self-generators, that would achieve a seven-year payback period. The group said its proposal would promote sustainable growth through a payback period “that customers find acceptable.”

The CPUC’s Public Advocates Office said that homeowners with new solar should be compensated at the utility’s avoided cost for their exported energy, through which they would “still receive a meaningful subsidy.” The office said that monthly bill savings would recover the system cost in 13-15 years, while solar panels retain 80% of their starting efficiency after 40 years, “so the system owner stands to accrue substantial long-term benefits.”

That office agreed with the proposals of a CPUC-commissioned white paper, which called for compensating export energy at avoided cost, adding “grid benefits charges” to cover distribution, transmission and public program costs, and gradually reducing export compensation from the current level. The office’s proposal would also provide storage incentives to existing self-generation customers.

CALSSA challenged that white paper’s analysis, saying it “unreasonably assumes the majority of utility costs are fixed,” and proposing alternative means to measure avoided costs, and to calculate the CPUC’s Ratepayer Impact Measure.

Both the SEIA/Vote Solar proposal and the CALSSA proposal would keep rates for new commercial distributed generation customers at NEM 2.0 levels.

The parties’ proposals are available in the California Public Utilities Commission docket for Proceeding R2008020.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -

Most Popular

TÜV SÜD issues the first HDPE+Metal PV float product certificate to Floatsola(Xiamen)Co.,Ltd.

China/Shanghai Recently, TÜV SÜD (hereinafter referred to as "TÜV SÜD"), the world's leading third-party testing and certification body, issued a certificate in conformity with...

Amazon warehouse fire linked to solar installation

The cause of a fire on the roof of an Amazon Warehouse in Perryville, Maryland, has been deemed to be an issue with the...

Michigan regulators approve DTE low-income solar program settlement

The Michigan Public Service Commission (MPSC) approved a settlement agreement between multiple stakeholders and DTE Electric regarding the utility’s Voluntary Green Pricing and MIGreenPower...

Back to business in Boston: Solar and Energy Storage Northeast… in-person!

Over 1,500 smiling faces gathered in Boston’s Seaport district to forge connections and display products and services live and in-person for the first time...