星期一, 7 7 月, 2025
Home PV News Half-cut modules from Sharp

Half-cut modules from Sharp

The Japanese electronics giant has unveiled three monocrystalline half-cut cell modules said to provide 2-3% better performance than standard, full cell panels. The claimed efficiency of the modules exceeds 19.5% and Sharp says power output ranges from 330-395 W.

Source:pv magazine

Japanese electronics giant Sharp Corporation has launched a new PERC monocrystalline PV module series based on half-cut cell technology.

The range features three five-busbar modules – the NU-JC330, NU-BA385 and NU-JB395 – which the company claims can offer a yield increase of up to 3% compared to full-cell rivals.

Sharp added, the smallest, 330 W, 120 half-cut cell module – which it says offers 19.5% efficiency for just 19.5 kg – is particularly suitable for commercial and industrial applications. The manufacturer said the other two, 144-cell panels – with power outputs of 385 W and 395 W – are recommended for large rooftop or ground-mounted projects. Those 23 kg products are said to have an efficiency of 19.6% and 1500 V system voltage. “With the addition of 1400mm cables that enable leapfrog wiring and [which] reduce balance of system (BOS) costs, this module is the ideal choice for major industrial projects and power plants,” said the company.

Advantages

Sharp said the three modules – which comply with IEC61215 and IEC61730 standards – are beneficial in projects with shady conditions, and added half-cut technology helps decrease temperatures compared to standard cell technology, as well as offering longer duration and lowering the risk of hot spots. “The half-cut cells can still generate a 50% performance with the upper half of the module, even when the lower half is shaded,” the company noted.

The Japanese manufacturer in April launched three PERC monocrystalline modules with a claimed conversion efficiency of 19.1%. The conglomerate in 2018 achieved 25.09% conversion efficiency from a cell using heterojunction and back-contact technology, as certified by the Japan Electrical Safety and Environment Technology Laboratories.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -

Most Popular

Al Kharsaah: A Pioneering Solar Power Plant in Qatar

Located 80 km west of Qatar's capital, Doha, the Al Kharsaah Solar PV Independent Power Producer (IPP) project is the country's first large-scale solar...

OMV Petrom Buys 50 Pct Stake in Gabare Solar Project

OMV Petrom S.A. has acquired a 50 percent stake in the Gabare solar project from Enery Element, a large-scale project in Byala Slatina, near...

RWE 7.5MW/11MWh battery energy storage start commercial operation in Netherlands

Power generation firm RWE has put a BESS in the Netherlands into commercial operation, its first that is capable of providing inertia to the...

Gurīn Energy selects Saft’s battery energy storage system for first Japanese project

Saft, a subsidiary of TotalEnergies, has been selected by leading Asian renewable energy developer Gurīn Energy to supply a battery energy storage system (BESS)...